무료 측량 도구 및 계산기

측량 전문가를 위한 온라인 도구. 가입 불필요, 광고 없음, 완전 무료.

좌표 변환기

Lat/Lon(WGS84), UTM, ECEF 간 변환.

도구 열기 →
°'"

DMS ↔ 10진수 변환기

도-분-초 (DMS) 형식과 10진수 도 사이의 좌표 변환.

도구 열기 →

거리 계산기

Haversine 또는 Vincenty 공식을 사용하여 두 지리적 지점 간의 거리와 방위각을 계산합니다.

도구 열기 →

삼각형 계산기 (SSS)

세 변으로부터 삼각형의 모든 각, 면적, 둘레 및 높이를 계산합니다.

도구 열기 →

역방위각 계산기

전방위각에서 역방위각(역방향)을 계산합니다.

도구 열기 →

수평곡선 계산기

원형 수평곡선의 호장, 접선장, 현장, 외거리 및 중앙종거를 계산합니다.

도구 열기 →

종단곡선 계산기

종단곡선의 구배와 길이로부터 PVC, PVT, 전환점 및 표고를 계산합니다.

도구 열기 →

다각형 면적 계산기

신발끈 공식을 사용하여 꼭짓점 좌표로부터 임의의 다각형의 면적을 계산합니다.

도구 열기 →

적석 체적 계산기

표준 기하 공식을 사용하여 원뿔, 절단된 원뿔 및 삼각형 프리즘의 적석 체적을 추정합니다.

도구 열기 →

절토 및 성토 계산기

건설 현장의 순 토공량, 수축 조정 수량 및 재료 균형을 계산합니다.

도구 열기 →

횡단 경사 / 편경사 계산기

AASHTO 방법을 기반으로 설계 속도, 반지름 및 측면 마찰을 기준으로 도로 곡선에 필요한 횡단 경사(편경사)를 계산합니다.

도구 열기 →

길이 단위 변환기

미터, ft, yd, 마일, 체인, 링크, 로드, 패덤 및 기타 단위 간 길이 변환.

도구 열기 →

면적 단위 변환기

제곱미터, 헥타르, 에이커, 제곱피트, 제곱마일 등 면적 단위를 변환합니다.

도구 열기 →

체적 단위 변환기

세제곱미터, 리터, 세제곱피트, 세제곱야드, 갤런 및 에이커-피트 간에 체적을 변환합니다.

도구 열기 →

기압 단위 변환기

Pa, kPa, bar, 기압, psi, mmHg 및 inHg 사이의 기압을 변환합니다. 기압 보정에 유용합니다.

도구 열기 →

온도 단위 변환기

섭씨도, 화씨도, 켈빈, 랭킨 및 레오뮤르 사이에서 온도를 변환합니다.

도구 열기 →

지붕 경사각 계산기

지붕 경사각을 rise:run, 백분율, 도(°) 단위의 각도로 변환합니다. 건물 외벽 측량 및 시공에 유용합니다.

도구 열기 →

토적 계산기 (횡단면)

횡단면 데이터에서 평균 단면적 방법을 사용하여 토공량을 계산합니다.

도구 열기 →

GDOP / PDOP / HDOP 계산기

GNSS 정밀도 약화(DOP) 값을 예상 수평, 수직 및 3D 위치 불확도로 변환합니다.

도구 열기 →

NMEA 0183 GGA 파서

GNSS NMEA GGA 문장을 읽기 쉬운 위치, 고정 품질, 위성 수 및 HDOP로 디코딩합니다.

도구 열기 →

GPS 시간 변환기

위성 데이터 처리를 위해 UTC, GPS 주/주내초, 율리우스력 날짜, Unix 타임스탬프 간 변환.

도구 열기 →

Level Height Difference Calculator

Calculate cumulative elevation changes from backsight/foresight readings in differential leveling surveys.

도구 열기 →

Trigonometric Leveling Calculator

Compute height difference between two points from slope distance, vertical/zenith angle, and instrument heights.

도구 열기 →

Reciprocal Leveling Calculator

Compute the true height difference between two points by averaging forward and backward leveling measurements, canceling curvature and refraction errors.

도구 열기 →

Traverse Closure Calculator

Compute linear closure error, precision ratio, and classification for closed-loop or connecting traverses.

도구 열기 →

Stationing Calculator

Convert between engineering stationing notation (e.g. 15+00.250) and decimal distances for roads, railways, and linear projects.

도구 열기 →

Offset Calculator

Compute coordinates of a point offset perpendicularly from a centerline, given start point, bearing, distance along and offset distance.

도구 열기 →

Concrete Volume Calculator

Calculate concrete volume for slabs, columns, footings, and cylindrical elements with wastage allowance and material estimates.

도구 열기 →

Staking Calculator

Compute bearing and distance from a reference control point to a target point for total station or GNSS setout.

도구 열기 →

Standard Deviation Calculator

Compute mean, standard deviation, variance, standard error and confidence intervals from repeated measurements.

도구 열기 →

Rise / Run Calculator

Compute slope, gradient, and hypotenuse length from two point coordinates. Useful for ramps, roofs, and terrain analysis.

도구 열기 →

Parcel Bearing & Area Calculator

Compute parcel area, perimeter, and closure from a sequence of bearings and distances. Standard for cadastral and boundary surveys.

도구 열기 →

Closure Ratio Classifier

Compute the closure ratio (1:N) of a traverse or parcel from linear misclosure and perimeter, and classify by geodetic accuracy order.

도구 열기 →

Grid Convergence Angle Calculator

Compute the convergence angle between true north and grid north at any location in a transverse Mercator projection (UTM, state plane).

도구 열기 →

Map Scale Calculator

Convert between map distances, real-world distances, and map scale ratios (1:25000, 1:10000, etc.) in multiple units.

도구 열기 →

Error Propagation Calculator

Combine individual measurement uncertainties (σ) using standard error propagation rules for sums, products, and weighted means.

도구 열기 →

위성 가시성 / 고각 마스크 계산기

장애물로 인한 차단된 고각을 추정하고 현장에 적합한 GNSS 차단각을 제시합니다.

도구 열기 →

RTK 정확도 계산기

기준선 길이와 제조사 사양을 기반으로 RTK 포지셔닝의 수평 및 수직 정확도를 추정합니다.

도구 열기 →

각도 변환기

도, 라디안, 그라디안(gon), 회전, DMS 간 변환.

도구 열기 →

경사 및 기울기 계산기

높이/수평, 백분율, 도, 비율에서 경사 계산.

도구 열기 →

방위 및 방위각 변환기

측량 방위(N 45° E)와 방위각(0-360°) 사이 변환.

도구 열기 →